Nodes

Kubernetes runs your workload by placing containers into Pods to run on Nodes. A node may be a virtual or physical machine, depending on the cluster. Each node is managed by the control plane and contains the services necessary to run Pods.

Typically you have several nodes in a cluster; in a learning or resource-limited environment, you might have only one node.

The components on a node include the kubelet, a container runtime, and the kube-proxy.

Management

There are two main ways to have Nodes added to the API server:

1. The kubelet on a node self-registers to the control plane
2. You (or another human user) manually add a Node object

After you create a Node object, or the kubelet on a node self-registers, the control plane checks whether the new Node object is valid. For example, if you try to create a Node from the following JSON manifest:

{
  "kind": "Node",
  "apiVersion": "v1",
  "metadata": {
    "name": "10.240.79.157",
    "labels": {
      "name": "my-first-k8s-node"
    }
  }
}

Kubernetes creates a Node object internally (the representation). Kubernetes checks that a kubelet has registered to the API server that matches the metadata.name field of the Node. If the node is healthy (i.e. all necessary services are running), then it is eligible to run a Pod. Otherwise, that node is ignored for any cluster activity until it becomes healthy.

The name of a Node object must be a valid DNS subdomain name.

Node name uniqueness

The name identifies a Node. Two Nodes cannot have the same name at the same time. Kubernetes also assumes that a resource with the same name is the same object. In case of a Node, it is implicitly assumed that an instance using the same name will have the same state (e.g. network settings, root disk contents). This may lead to inconsistencies if an instance was modified without changing its name. If the Node needs to be replaced or updated significantly, the existing Node object needs to be removed from API server first and re-added after the update.

Self-registration of Nodes

When the kubelet flag --register-node is true (the default), the kubelet will attempt to register itself with the API server. This is the preferred pattern, used by most distros.

For self-registration, the kubelet is started with the following options:

• --kubeconfig - Path to credentials to authenticate itself to the API server.

• --cloud-provider - How to talk to a cloud provider to read metadata about itself.

• --register-node - Automatically register with the API server.

• --register-with-taints - Register the node with the given list of taints (comma separated <key>=<value>:<effect>).

  No-op if register-node is false.

• --node-ip - IP address of the node.

• --node-labels - Labels to add when registering the node in the cluster (see label restrictions enforced by the NodeRestriction admission plugin).

• --node-status-update-frequency - Specifies how often kubelet posts node status to master.

When the Node authorization mode and NodeRestriction admission plugin are enabled, kubelets are only authorized to create/modify their own Node resource.

Manual Node administration

You can create and modify Node objects using kubectl.

When you want to create Node objects manually, set the kubelet flag --register-node=false.

You can modify Node objects regardless of the setting of --register-node. For example, you can set labels on an existing Node or mark it unschedulable.

You can use labels on Nodes in conjunction with node selectors on Pods to control scheduling. For example, you can constrain a Pod to only be eligible to run on a subset of the available nodes.

Marking a node as unschedulable prevents the scheduler from placing new pods onto that Node but does not affect existing Pods on the Node. This is useful as a preparatory step before a node reboot or other maintenance.

To mark a Node unschedulable, run:

kubectl cordon $NODENAME

See Safely Drain a Node for more details.

Node status

A Node's status contains the following information:

• Addresses
• Conditions
• Capacity and Allocatable
• Info

You can use kubectl to view a Node's status and other details:

kubectl describe node <insert-node-name-here>

Each section of the output is described below.

Addresses

The usage of these fields varies depending on your cloud provider or bare metal configuration.

• HostName: The hostname as reported by the node's kernel. Can be overridden via the kubelet --hostname-override parameter.
• ExternalIP: Typically the IP address of the node that is externally routable (available from outside the cluster).
• InternalIP: Typically the IP address of the node that is routable only within the cluster.

Conditions

The conditions field describes the status of all Running nodes. Examples of conditions include:

In the Kubernetes API, a node's condition is represented as part of the .status of the Node resource. For example, the following JSON structure describes a healthy node:

"conditions": [
  {
    "type": "Ready",
    "status": "True",
    "reason": "KubeletReady",
    "message": "kubelet is posting ready status",
    "lastHeartbeatTime": "2019-06-05T18:38:35Z",
    "lastTransitionTime": "2019-06-05T11:41:27Z"
  }
]

If the status of the Ready condition remains Unknown or False for longer than the pod-eviction-timeout (an argument passed to the kube-controller-manager), then the node controller triggers API-initiated eviction for all Pods assigned to that node. The default eviction timeout duration is five minutes. In some cases when the node is unreachable, the API server is unable to communicate with the kubelet on the node. The decision to delete the pods cannot be communicated to the kubelet until communication with the API server is re-established. In the meantime, the pods that are scheduled for deletion may continue to run on the partitioned node.

The node controller does not force delete pods until it is confirmed that they have stopped running in the cluster. You can see the pods that might be running on an unreachable node as being in the Terminating or Unknown state. In cases where Kubernetes cannot deduce from the underlying infrastructure if a node has permanently left a cluster, the cluster administrator may need to delete the node object by hand. Deleting the node object from Kubernetes causes all the Pod objects running on the node to be deleted from the API server and frees up their names.

When problems occur on nodes, the Kubernetes control plane automatically creates taints that match the conditions affecting the node. The scheduler takes the Node's taints into consideration when assigning a Pod to a Node. Pods can also have tolerations that let them run on a Node even though it has a specific taint.

See Taint Nodes by Condition for more details.

Capacity and Allocatable

Describes the resources available on the node: CPU, memory, and the maximum number of pods that can be scheduled onto the node.

The fields in the capacity block indicate the total amount of resources that a Node has. The allocatable block indicates the amount of resources on a Node that is available to be consumed by normal Pods.

You may read more about capacity and allocatable resources while learning how to reserve compute resources on a Node.

Info

Describes general information about the node, such as kernel version, Kubernetes version (kubelet and kube-proxy version), container runtime details, and which operating system the node uses. The kubelet gathers this information from the node and publishes it into the Kubernetes API.

Heartbeats

Heartbeats, sent by Kubernetes nodes, help your cluster determine the availability of each node, and to take action when failures are detected.

For nodes there are two forms of heartbeats:

• updates to the .status of a Node
• Lease objects within the kube-node-lease namespace. Each Node has an associated Lease object.

Compared to updates to .status of a Node, a Lease is a lightweight resource. Using Leases for heartbeats reduces the performance impact of these updates for large clusters.

The kubelet is responsible for creating and updating the .status of Nodes, and for updating their related Leases.

• The kubelet updates the node's .status either when there is change in status or if there has been no update for a configured interval. The default interval for .status updates to Nodes is 5 minutes, which is much longer than the 40 second default timeout for unreachable nodes.
• The kubelet creates and then updates its Lease object every 10 seconds (the default update interval). Lease updates occur independently from updates to the Node's .status. If the Lease update fails, the kubelet retries, using exponential backoff that starts at 200 milliseconds and capped at 7 seconds.

Node controller

The node controller is a Kubernetes control plane component that manages various aspects of nodes.

The node controller has multiple roles in a node's life. The first is assigning a CIDR block to the node when it is registered (if CIDR assignment is turned on).

The second is keeping the node controller's internal list of nodes up to date with the cloud provider's list of available machines. When running in a cloud environment and whenever a node is unhealthy, the node controller asks the cloud provider if the VM for that node is still available. If not, the node controller deletes the node from its list of nodes.

The third is monitoring the nodes' health. The node controller is responsible for:

• In the case that a node becomes unreachable, updating the NodeReady condition of within the Node's .status. In this case the node controller sets the NodeReady condition to ConditionUnknown.
• If a node remains unreachable: triggering API-initiated eviction for all of the Pods on the unreachable node. By default, the node controller waits 5 minutes between marking the node as ConditionUnknown and submitting the first eviction request.

The node controller checks the state of each node every --node-monitor-period seconds.

Rate limits on eviction

In most cases, the node controller limits the eviction rate to --node-eviction-rate (default 0.1) per second, meaning it won't evict pods from more than 1 node per 10 seconds.

The node eviction behavior changes when a node in a given availability zone becomes unhealthy. The node controller checks what percentage of nodes in the zone are unhealthy (NodeReady condition is ConditionUnknown or ConditionFalse) at the same time:

• If the fraction of unhealthy nodes is at least --unhealthy-zone-threshold (default 0.55), then the eviction rate is reduced.
• If the cluster is small (i.e. has less than or equal to --large-cluster-size-threshold nodes - default 50), then evictions are stopped.
• Otherwise, the eviction rate is reduced to --secondary-node-eviction-rate (default 0.01) per second.

The reason these policies are implemented per availability zone is because one availability zone might become partitioned from the master while the others remain connected. If your cluster does not span multiple cloud provider availability zones, then the eviction mechanism does not take per-zone unavailability into account.

A key reason for spreading your nodes across availability zones is so that the workload can be shifted to healthy zones when one entire zone goes down. Therefore, if all nodes in a zone are unhealthy, then the node controller evicts at the normal rate of --node-eviction-rate. The corner case is when all zones are completely unhealthy (none of the nodes in the cluster are healthy). In such a case, the node controller assumes that there is some problem with connectivity between the control plane and the nodes, and doesn't perform any evictions. (If there has been an outage and some nodes reappear, the node controller does evict pods from the remaining nodes that are unhealthy or unreachable).

The node controller is also responsible for evicting pods running on nodes with NoExecute taints, unless those pods tolerate that taint. The node controller also adds taints corresponding to node problems like node unreachable or not ready. This means that the scheduler won't place Pods onto unhealthy nodes.

Resource capacity tracking

Node objects track information about the Node's resource capacity: for example, the amount of memory available and the number of CPUs. Nodes that self register report their capacity during registration. If you manually add a Node, then you need to set the node's capacity information when you add it.

The Kubernetes scheduler ensures that there are enough resources for all the Pods on a Node. The scheduler checks that the sum of the requests of containers on the node is no greater than the node's capacity. That sum of requests includes all containers managed by the kubelet, but excludes any containers started directly by the container runtime, and also excludes any processes running outside of the kubelet's control.

Node topology

If you have enabled the TopologyManager feature gate, then the kubelet can use topology hints when making resource assignment decisions. See Control Topology Management Policies on a Node for more information.

Graceful node shutdown

The kubelet attempts to detect node system shutdown and terminates pods running on the node.

Kubelet ensures that pods follow the normal pod termination process during the node shutdown.

The Graceful node shutdown feature depends on systemd since it takes advantage of systemd inhibitor locks to delay the node shutdown with a given duration.

Graceful node shutdown is controlled with the GracefulNodeShutdown feature gate which is enabled by default in 1.21.

Note that by default, both configuration options described below, ShutdownGracePeriod and ShutdownGracePeriodCriticalPods are set to zero, thus not activating Graceful node shutdown functionality. To activate the feature, the two kubelet config settings should be configured appropriately and set to non-zero values.

During a graceful shutdown, kubelet terminates pods in two phases:

1. Terminate regular pods running on the node.
2. Terminate critical pods running on the node.

Graceful node shutdown feature is configured with two KubeletConfiguration options:

• ShutdownGracePeriod:
  • Specifies the total duration that the node should delay the shutdown by. This is the total grace period for pod termination for both regular and critical pods.
• ShutdownGracePeriodCriticalPods:
  • Specifies the duration used to terminate critical pods during a node shutdown. This value should be less than ShutdownGracePeriod.

For example, if ShutdownGracePeriod=30s, and ShutdownGracePeriodCriticalPods=10s, kubelet will delay the node shutdown by 30 seconds. During the shutdown, the first 20 (30-10) seconds would be reserved for gracefully terminating normal pods, and the last 10 seconds would be reserved for terminating critical pods.

Status:         Failed
Reason:         Shutdown
Message:        Node is shutting, evicting pods

Swap memory management

Prior to Kubernetes 1.22, nodes did not support the use of swap memory, and a kubelet would by default fail to start if swap was detected on a node. In 1.22 onwards, swap memory support can be enabled on a per-node basis.

To enable swap on a node, the NodeSwap feature gate must be enabled on the kubelet, and the --fail-swap-on command line flag or failSwapOn configuration setting must be set to false.

A user can also optionally configure memorySwap.swapBehavior in order to specify how a node will use swap memory. For example,

memorySwap:
  swapBehavior: LimitedSwap

The available configuration options for swapBehavior are:

• LimitedSwap: Kubernetes workloads are limited in how much swap they can use. Workloads on the node not managed by Kubernetes can still swap.
• UnlimitedSwap: Kubernetes workloads can use as much swap memory as they request, up to the system limit.

If configuration for memorySwap is not specified and the feature gate is enabled, by default the kubelet will apply the same behaviour as the LimitedSwap setting.

The behaviour of the LimitedSwap setting depends if the node is running with v1 or v2 of control groups (also known as "cgroups"):

• cgroupsv1: Kubernetes workloads can use any combination of memory and swap, up to the pod's memory limit, if set.
• cgroupsv2: Kubernetes workloads cannot use swap memory.

For more information, and to assist with testing and provide feedback, please see KEP-2400 and its design proposal.

What's next

• Learn about the components that make up a node.
• Read the API definition for Node.
• Read the Node section of the architecture design document.
• Read about taints and tolerations.